Canon GM2000 Series Online Manual page 97

Hide thumbs Also See for GM2000 Series:
Table of Contents

Advertisement

Deep Cleaning
After deep print head cleaning, print and examine the nozzle check pattern:
When you have performed the procedure until step 4 and the problem has not been resolved, turn off the
power and clean the print head deeply again after 24 hours. Do not unplug the power cord when turning off the
power.
If the problem is still not resolved, perform ink flush.
Ink flush consumes a great amount of ink. Frequent ink flush can rapidly consume ink, so perform ink flush
only when necessary.
Important
• If ink flush is performed when the remaining ink level is insufficient, it may cause a failure. Be sure to
check the remaining ink level before performing ink flush.
Ink Flush
If the nozzle check pattern is not printed correctly even after performing ink flush, see Check Installation of
Print Head.
When the Print Results Are Not Even such as the Ruled Lines Are
Misaligned:
Align the print head.
Step
From the printer
Aligning the Print Head
From the computer
Adjusting Print Head Position Automatically
97
Step1

Advertisement

Table of Contents
loading

Table of Contents