Canon GM2000 Series Online Manual page 331

Hide thumbs Also See for GM2000 Series:
Table of Contents

Advertisement

6. Make sure all jammed paper is removed.
If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and
remove any remaining paper.
• Any paper left under the print head holder?
• Any small bits of paper left in the printer?
• Any paper left in the left and right empty spaces (D) in the printer?
7. Close top cover.
All jobs in the print queue are canceled. Redo the printing.
Note
• When reloading the paper, make sure you are using suitable paper and loading it correctly. If a
paper jam message appears on your computer screen when you resume printing after removing
all the jammed paper, there may be some paper still inside the printer. Check the printer again for
any remaining bits of paper.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
331

Advertisement

Table of Contents
loading

Table of Contents