Download  Print this page

Canon GM2000 Series Online Manual Page 276

Hide thumbs

Advertisement

In Windows 10, right-click Start and select Command Prompt.
In Windows 8.1, select Command Prompt from the Start screen. If Command Prompt is not
displayed on the Start screen, select the Search charm and search for "Command Prompt".
In Windows 7, click Start > All Programs > Accessories > Command Prompt.
2. Type the ping command and press Enter.
The ping command is as follows: ping XXX.XXX.XXX.XXX
"XXX.XXX.XXX.XXX" is the IP address of the target device.
If communication is taking place, a message like the one shown below appears.
Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255
If Request timed out appears, communication is not taking place.
Checking Network Setting Information
To check the printer's network settings information, print out the network settings information.
Printing Network Settings
276

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: