Canon GM2000 Series Online Manual page 281

Hide thumbs Also See for GM2000 Series:
Table of Contents

Advertisement

Cannot Communicate with Printer while It Is in Wireless Direct
If your smartphone/tablet cannot communicate with the printer in the Wireless Direct, check the following.
Check the power status of printer and other devices (smartphone or tablet).
Check1
Turn on the printer or devices.
If the power is already turned on, cycle the power switch.
Is Wireless Direct enabled?
Check2
To enable Wireless Direct, press and hold the RESUME/CANCEL button and release it when the Alarm lamp
flashes 12 or 14 times.
Check the settings of your device (smartphone/tablet).
Check3
Make sure Wi-Fi is enabled on your device.
For details, refer to your device's instruction manual.
Make sure printer is selected as connection for device (e.g. smartphone or
Check4
tablet).
Select the network name (SSID) for Wireless Direct specified for the printer as the connection destination for
devices.
Check the destination on your device.
For details, refer to your device's instruction manual or visit the manufacturer's website.
To check the network name (SSID) for Wireless Direct specified for the printer, print out the network setting
information of the printer.
Printing Network Settings
Have you entered the proper password specified for the Wireless Direct?
Check5
To check the password specified for the printer, print out the network setting information of the printer.
Printing Network Settings
Make sure the printer is not placed too far away from the device.
Check6
If the distance between the printer and device is too far, wireless communication becomes poor. Place the
printer and device close to each other.
Make sure 5 devices are already connected.
Check7
Wireless Direct does not allow more than 5 devices to be connected.
281

Advertisement

Table of Contents
loading

Table of Contents