Canon GM2000 Series Online Manual page 298

Hide thumbs Also See for GM2000 Series:
Table of Contents

Advertisement

1. Roll up paper in opposite direction to paper curl as shown below.
2. Check that paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.
This may improve the print result.
(B) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
Set printer to prevent paper abrasion.
Check4
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper. If
you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paper
abrasion using the operation panel or the computer.
This may reduce the print speed.
* Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs.
• From operation panel:
Press and hold the RESUME/CANCEL button and release it when the Alarm lamp flashes 7 times.
• From computer (Windows):
1. Check that printer is turned on.
2. Open Canon IJ Printer Assistant Tool.
298

Advertisement

Table of Contents
loading

Table of Contents