Vdc Power Source; Reset Buttons; Figure 8: Example Of Selected Menu; Figure 9: 24 Vdc Connector - Smartrise C4 User Manual

C4 User Manual
The selected menu within the menu options is shown with a *.
See http://avtanski.net/projects/lcd/

2.3 24 VDC Power Source

The 24 VDC power and reference connection to ground only requires having one terminal
connected to the MR board. All other connections can be used for auxiliary sources, as needed.

2.4 Reset Buttons

There are three reset buttons.
• EQ RST – Resets a seismic fault due to an earthquake.
• TLOSS TST – Resets traction loss fault.
Page 10

Figure 8: Example of Selected Menu

for LCD images.

Figure 9: 24 VDC Connector

© 2019 Smartrise Engineering, Inc. All Rights Reserved August 15, 2019