2.1.2 24 Vdc Power Source; 2.1.3 Reset Buttons; Figure 9: Example Of Selected Menu; Figure 10: 24 Vdc Connector - Smartrise C4 User Manual

C4 User Manual
The selected menu within the menu options is shown with a *.
See http://avtanski.net/projects/lcd/ for LCD images.

2.1.2 24 VDC Power Source

The 24 VDC power and reference connection to ground only requires having one terminal
connected to the MR board. All other connections can be used for auxiliary sources, as needed.

2.1.3 Reset Buttons

There are three reset buttons. When performing a reset via the reset buttons, press the button
and immediately release it. The fault will reset after 5-6 seconds.
• EQ RST – Resets a seismic fault due to an earthquake
• TLOSS RST – Resets traction loss fault
• EBRK RST – Clears the latching type of fault
Page 10

Figure 9: Example of Selected Menu

Figure 10: 24 VDC Connector

Figure 11: Reset Switches

©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021