C4 User Manual
EBS Terminal – Connects the supply voltage for the emergency brake. Depending on the rope
brake or disc ratings, this will either be 120 VAC or 240 VAC.
Figure 14: 120 VAC Connector
2.8 24 VDC Inputs and Outputs
24 VDC input is labeled 501-508.
Each input is activated when 24 VDC is applied to it. LEDs 501-508 are lit when active.
See the C4 Controller sheet 02 Machine Room I/O for wiring information.
Figure 15: 24 VDC Input Connector
Page 14
© 2019 Smartrise Engineering, Inc. All Rights Reserved
August 15, 2019