Installing Sitrans Ms200 On A Pump Or Compressor - Siemens SITRANS SCM IQ Operating Instructions Manual

In all cases a strong and form-fitting mount for good vibrations transmission is required.
Note
For temporary mountings (for example testing purposes) you can also use a strong magnet or
an industry graded glue to mount SITRANS MS200.
Note
Mount SITRANS MS200 so that the lid can be easily removed in the mounted state for a
later battery pack replacement (Page 72).
For more information, watch this video: SITRANS SCM IQ: How to mount the Multisensor
(https://www.youtube.com/watch?v=kHCWsAgltqE)
See also
Dimension drawings SITRANS MS200 (Page 92)
Note
Influences on data transmission
The positioning of the sensors and the gateway as well as the environmental conditions
influence the data transmission between SITRANS MS200 and SITRANS CC220. In case of an
unfavorable constellation, transmission losses may occur.
5.2.3

Installing SITRANS MS200 on a pump or compressor

Mount SITRANS MS200 near the liquid inlet directly on the pump.
Note
SITRANS MS200 must not get in direct contact with chemicals.
NOTICE
Maximum specified ambient temperature
The maximum specified ambient temperature must not be exceeded by the pump or
compressor. See Technical specifications SITRANS MS200 (Page 87).
SITRANS SCM IQ: Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 07/2023, A5E50573389-AD
5.2 Installation instructions SITRANS MS200
Installing/mounting
39