Preparing for use
Good planning and preparation of motor applications are essential in terms of keeping
installation simple and avoiding errors, ensuring safe operation, and allowing access to the
motor for servicing and corrective maintenance.
This chapter outlines what you need to consider when engineering/configuring your plant in
relation to this motor and the preparations you need to make before the motor is delivered.
4.1
Safety-related aspects to consider when configuring the plant
A number of residual risks are associated with the motor. These are described in Chapter
"Safety information (Page 139)" and related sections.
Take appropriate safety precautions (covers, barriers, markings, etc.) to ensure the motor is
operated safely within your plant.
4.2
Observing the operating mode
Observe the motor's operating mode. Use a suitable control system to prevent overspeeds,
thus protecting the motor from damage.
4.3
Motors without final paint coating
For motors, which are only delivered with primer, you must paint them to comply with the
applicable guidelines for the specific application. The primer alone does not provide adequate
corrosion protection.
Please contact the Service Center for recommendations relating to the paint finish.
1LE8 轴高 80 ... 355
操作说明, 11/2022, A5E52373573A
4
153