Xerox WorkCentre 5020 Service Documentation page 68

Regular Deletions in the Process Direction (Spots, Streaks, Bands,
etc.)
Cause
1. 94mm Pitch (Drum): Scratches or foreign substances.
2. 57mm Pitch (Developer Roll): Developer material clogging on the Magnetic Roll.
3. 44mm Pitch (Charger): Scratches or foreign substances.
Image Quality
Figure 8 Regular Deletions in the Process Direction (Spots, Streaks, Bands, etc.)
July, 2007
4. 80mm Pitch (Fuser Heat Roll): Scratches or foreign substances.
Action
1. 1,4: Clean or replace the Drum Cartridge (PL 4.1) (REP 4.1.1)/Fuser (PL 5.1) (REP
5.1.1).
2. 2,3: Replace the Drum Cartridge (PL 4.1) (REP 4.1.1).
3-24
Initial Issue
WorkCentre 5020