Xerox WorkCentre 5020 Service Documentation page 158

3. Remove the Tray 2 Feed Roll (Figure 2).
1 Remove the KL-Clip.
2 Remove the Tray 2 Feed Roll.
Repairs and Adjustments
REP 11.4.1
Figure 2
Replacement
1. To install, do the removal steps in reverse order.
2. When installing the Tray 2 Feed Roll, align the pin on the Feed Shaft with the groove in
the Tray 2 Feed Roll (Figure 3).
July, 2007
4-86
Figure 3
Initial Issue
WorkCentre 5020