Xerox WorkCentre 5020 Service Documentation page 126

6. Remove the HVPS and Contact Block (Figure 3).
1 Remove the Tapping Screws (3).
2 Disconnect the connector at the inner side of the HVPS.
3 Remove the HVPS and Contact Block.
Repairs and Adjustments
REP 8.2.1
Figure 3
7. Separate the HVPS from the Contact Block (Figure 4).
1 Remove the Contact Block in the direction of the arrow.
July, 2007
4-54
Figure 4
Initial Issue
WorkCentre 5020