Xerox WorkCentre 5020 Service Documentation page 108

4. Remove the Fuser Roll Retaining Rings and Drive Gear (Figure 4).
1 Remove the Retaining Ring.
2 Remove the Drive Gear.
3 Remove the Retaining Ring from the other end of the Fuser Roll.
Fuser Roll
Drive Gear
Figure 4 Removing the Retaining Rings and Drive Gear
Repairs and Adjustments
REP 5.1.4
Retaining Ring
5. Remove the Fuser Roll by pulling it through the Bushings in the Frame (Figure 5).
Fuser Roll
Frame
Figure 5 Removing the Fuser Roll
July, 2007
4-36
Bushing
WorkCentre 5020
Initial Issue