Xerox WorkCentre 5020 Service Documentation page 29

Hide thumbs Also See for WorkCentre 5020:
Table of Contents

Advertisement

Error
Code
Error Name/Explanation/I/O Diagnostic Codes/Check Items
Error Name
Exit SNR on JAM
Explanation
Timeout between IOT Registration Clutch ON and Fuser Exit Sensor ON.
I/O Diagnostic Codes (How to Enter the Diagnostic Mode)
[08-10] IOT Registration Clutch
[10-23] Fuser Exit Sensor
Check Items
Registration Roll dirty, contaminated with paper dust, worn, or faulty
Fuser Exit Sensor dirty and Sensor Actuator deformed or damaged
Paper damaged or not within specification
E1-2
Foreign matter, burrs, or paper in the paper path
Drive gear worn or damaged
IOT Registration Clutch faulty
Check that the IOT Registration Clutch and the LVPS J503-4/5 ( P/J503) pins are connected securely with good electrical contact. If there is
no problem, replace the IOT Registration Clutch (PL 2.9).
Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Fuser Exit Sensor (PL
6.2).
Wire between Fuser Exit Sensor J153-3 ( P/J153) and LVPS J505-1 ( P/J505)
Wire between Fuser Exit Sensor J153-2 and LVPS J505-2
Wire between Fuser Exit Sensor J153-1 and LVPS J505-3
Replace the AIOC PWB (PL 8.1) (REP 8.1.1).
Error Name
Exit SNR off JAM
Explanation
Timeout between Fuser Exit Sensor ON and Fuser Exit Sensor OFF.
I/O Diagnostic Codes (How to Enter the Diagnostic Mode)
[10-23] Fuser Exit Sensor
Check Items
Fuser Exit Sensor dirty and Sensor Actuator deformed or damaged
Paper damaged or not within specification
E3-1
Foreign matter, burrs, or paper in the paper path
Drive gear worn or damaged
Check that the following wires are connected securely with good electrical contact. If there is no problem, replace the Fuser Exit Sensor (PL
6.2).
Wire between Fuser Exit Sensor J153-3 ( P/J153) and LVPS J505-1 ( P/J505)
Wire between Fuser Exit Sensor J153-2 and LVPS J505-2
Wire between Fuser Exit Sensor J153-1 and LVPS J505-3
Replace the LVPS (PL 8.1) (REP 8.1.2) and the AIOC PWB (PL 8.1) (REP 8.1.1) in that order.
Initial Issue
WorkCentre 5020
July, 2007
2-17
Record in
Error Log
RAP
BSD
CH10.2
O
-
Figure 2
CH10.2
O
-
Figure 2
Status Indicator RAPS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents