Xerox WorkCentre 5020 Service Documentation page 143

11. While maintaining tension on the Carriage Cable (silver) at the rear right side, disconnect
it (Figure 9).
1 Disconnect the Carriage Cable.
Initial Issue
WorkCentre 5020
Figure 9
12. Use tape to secure the Carriage Cable (silver) that was disconnected in step 11 so that it
does not get separated from the Cable Supply Drum (Figure 10).
1 Secure the Carriage Cable with tape.
July, 2007
4-71
Figure 10
Repairs and Adjustments
REP 10.3.1