Sine Encoder With Endat 2.1 Or Hiperface (X1) - Danaher Motion 601...620 Product Manual

Electrical Installation
8.11.3

Sine Encoder with EnDat 2.1 or HIPERFACE (X1)

Wiring of a single-turn or multiturn sine-cosine encoder as a feedback system. Preferred types are
ECN1313 and EQN1325.
The thermostat contact in the motor is connected via the encoder cable to the SERVOSTAR 600
and evaluated there. All signals are connected using our pre-assembled encoder connection cable.
Encoder types with a power consumption of more than 150mA can also be connected using our
external power supply (ð p. 113). For encoders that do not have integrated terminating resistors,
we offer an optional terminating adapter (ð p.
If lead lengths of more than 50m are planned, please consult our customer service.
Frequency limit (sin, cos): 250 kHz
Encoder with EnDat: FBTYPE 3, 4
Encoder with HIPERFACE: FBTYPE 2, 3
54
07/2007
SubD1
SERVOSTAR 600
SERVOSTAR
113).
17pol.round
®
601...620 Product Manual
Danaher Motion