Important Screen Elements - Danaher Motion 601...620 Product Manual

Danaher Motion
If communication works, parameters are transmitted from the servoamplifier to the computer.
Then you see the start screen.
9.3.3

Important Screen Elements

Help Function
The Online-Help gives detailed information to all parameters the servo amplifier can work with.
Key F1
Menu Bar ? or
Online HTML Help
Tool Bar
Status Bar
®
SERVOSTAR 601...620 Product Manual
07/2007
Starts Online Help for the actual screen page.
Starts Online Help with table of contents.
Save to EEPROM,
required if you changed parameters.
Reset (coldstart),
required if you changed important configuration parameters.
Operation Mode, use Digital Velocity mode for drive testing.
Disable and Enable of the amplifier's output stage via software.
Make sure, that the amplifier is
disabled (Input HW-Enable
connector X3 pin 15 must be
0 V or open)!
Setup
77