Device Interfacing Solution Components; Connections - GE Datex-Ohmeda S/5 Series Technical Reference Manual

N-DISTONO
N-DISWHITE
1 Trademark of Hospira Inc. (previously trademark of Abbott Laboratories)
2 Trademark of Aspect Medical Systems
3 Trademark of Edwards Lifesciences Corporation
4 Trademark of Pulsion Medical Systems
5 Trademark of GE Healthcare Finland Oy
N-DISOPT
N-DISHL20
1 Trademark of Diamond Diagnostics Inc
2 Trademark of MAQUET GmbH & Co. KG part of the Getinge Group
For specific information on parameters transferred from the interfaced device to the
Datex-Ohmeda monitor and the applicable software versions of the device refer to the
Installation guide accompanying each DIS module.

4.2.1 Device Interfacing Solution components

The Device Interfacing Solution consists of:
−
a device specific interfacing module
−
a device specific cable
−
a bus cable
−
a connector for another bus cable
−
label specifying the external device

4.2.2 Connections

Connect the device specific cable to the external device and the bus cable to the monitor's DIS
connector or to another interfacing module.
Tonocap 5
5
Capnomac, Capnomac II
Multicap, Normocap, CD2-O2
5
Capnomac Ultima
5
Normocap CD-200
Oscar Oxy, Cardiocap 1GS, Cardiocap 2GS
Satlite, Satlite Trans, Satlite Plus
Device Blood gas analyzers
AVL Opti CCA 1
Device Heart-lung machines
2
Jostra HL-20
5
5
5
Interfacing
Document no. M1144951-004
39