Service Procedures; General Service Information; Service Check; Recommended Tools - GE Datex-Ohmeda S/5 Series Technical Reference Manual

3

Service procedures

3.1 General service information

The field service of the S/5 Compact Anesthesia Monitor and S/5 Compact Critical Care Monitor
is limited to replacing faulty PC boards and mechanical parts. Return the faulty PC boards to
GE Healthcare for repair.
GE Healthcare is always available for service advice. Please provide the unit serial number, full
type designation and a detailed fault description.
CAUTION Only trained personnel with appropriate tools and equipment shall perform the
tests and repairs outlined in this section. Unauthorized service may void the
warranty of the unit.

3.2 Service check

S/5 Compact Anesthesia Monitor, F-CM(REC)1
S/5 Compact Critical Care Monitor, F-CMC(REC)1
These instructions include complete procedures for a service check. The service should be
performed after any service repair. Additionally, the service check procedures can also be used
for determining possible failures.
The procedures should be performed in ascending order.
The instructions include a check form
the procedures.
The symbol
performing the procedure.

3.2.1 Recommended tools

Tool
Power cord
Screwdrivers
Multiparameter hemodynamic
module

3.2.2 Recommended parts

Part
Frame Unit Fan filter
Recorder paper
Frame Unit for F-CM(C)1 (Rev. 05), F-CM(C)REC1 (Rev. 01)
("APPENDIX
in the instructions means that the check list should be signed after
Order No.
Order No.
896085
74205
A:") which should be filled in when performing
Notes
Notes
for recorder unit
Document no. M1144958-001
11