Service Procedures; General Service Information; Service Check; Recommended Tools - GE Datex-Ohmeda S/5 Series Technical Reference Manual

Datex-Ohmeda S/5 Compact Anesthesia and Compact Critical Care Monitors
3

Service procedures

3.1 General service information

The field service of the S/5 Compact Anesthesia Monitor and S/5 Compact Critical Care Monitor
is limited to replacing faulty PC boards and mechanical parts. Return the faulty PC boards to
GE Healthcare for repair.
GE Healthcare is always available for service advice. Please provide the unit serial number, full
type designation and a detailed fault description.
CAUTION Only trained personnel with appropriate tools and equipment shall perform the
tests and repairs outlined in this section. Unauthorized service may void the
warranty of the unit.

3.2 Service check

S/5 Compact Anesthesia Monitor, F-CM(REC)1
S/5 Compact Critical Care Monitor, F-CMC(REC)1
Display Unit
These instructions include complete procedures for a service check. The service should be
performed after any service repair. Additionally, the service check procedures can also be used
for determining possible failures.
The procedures should be performed in ascending order.
The instructions include a check form
performing the procedures.
The symbol
performing the procedure.

3.2.1 Recommended tools

NOTE: Use only calibrated and traceable measuring equipment.
Tool
Power cord
Screwdrivers
MemCard - Menu
MemCard - Data
Anaesthesia Keyboard, K-ARKB
K-ARK interface cable
Hemodynamic Module
20
.
Document no M1144956-003
("APPENDIX
in the instructions means that the check list should be signed after
Order No.
881154
A:"), which should be filled in when
Notes
for MemCard Option
for MemCard Option