Vidicode 1390 Manual page 75

FTP ID: 0000
NEXT CHANGE
This is the ID a user should give to approach a Call Recorder via FTP. There
is only one possible ID.
FTP code: XXXXXXXX
NEXT CHANGE
The access code for an FTP session. The default setting is 0000.
The next question concerns a property of your network:
Use DHCP Server
NEXT CHANGE
If there is a DHCP, server, the recorder will automatically be assigned an IP
address (network address), in which case any application called up by the
recorder will ask for the IP name of the recorder. If DHCP is not available the
user will have to give an IP address himself, which will be used by any
application approaching the recorder:
IP addr: 168.102.000.012
NEXT CHANGE
In an application with linked networks without DHCP server there will not only
be a question about the IP address, but also about the IP subnet mask:
IP mask: 255.255.255.0
NEXT CHANGE
The IP subnet mask is only applicable for access to recorders via an Internet
or intranet. Normally you will not have to change this setting.
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
BACK
BACK
Yes
BACK
BACK
BACK
75