Turning On The Power - Vidicode 1390 Manual

For a direct serial connection:
D
Connect the PC cable to the 'PC' port on the Call Recorder, and to
Com 1 or Com 2 on the PC
The throughput of a serial connection is rather slow but this type of
connection can be made with almost any PC
For a connection over the LAN or internet:
E Connect the ethernet port of the recorder with a hub or switch of
your network using a standard network patch cable
This is the preferred way for an office environment with several recorders.
For a direct connection between the ethernet port of the recorder and
the ethernet port of a PC
E Connect the ethernet port of the recorder with the ethernet port of
the PC using a special crossover cable
In this way a very fast connection between a PC and a recorder can be
established for applications where there is only one PC and one recorder.
When such a fast connection is required but the PC has no ethernet card but
does have a USB port, as is common on notebook PC's, a USB to ethernet
adapter can bridge the gap and offer a cost efficient high speed connection.
2.4

Turning on the power

Connect the mains supply adapter to the mains. The display will show the
following text:
RESET
Followed by:
20
INIT
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV