Use Of Speaker With Answering Machine; Maximum Message Time - Vidicode 1390 Manual

Ring Variation
Ring variation allows you to program the number of bleeps per ring, and how
long they last for.
Ring Frequency
Each ring is split into a sequence of a few double tones, the frequency of
which can be programmed with this parameter.
Ring Volume
This parameter sets the loudness of the ring. The setting 'Off' is used to
switch off the ring of the Call Recorder
8.2.8

Use of Speaker with Answering Machine

Speaker after Answer: On
NEXT CHANGE
This parameter allows you to listen to the telephone answering machine via
the speaker. When it is switched to 'On', the loudspeaker will automatically
turn itself on when a message is being spoken into the answering machine,
so that you could pick up the phone yourself if you wanted to.
8.2.9

Maximum Message Time

Max. Message time:
NEXT CHANGE
The maximum length of a message recorded onto the answering machine
can be set with this function, and can be varied between 30 and 7650
seconds. Programming a long maximum message time is no problem,
because recording is stopped automatically at the end of the message, or
when the connection is broken off.
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
BACK
120s
BACK
61