Switching The Answering Machine On Remotely; Changing The System Messages - Vidicode 1390 Manual

9.2.7

Switching the Answering Machine on Remotely

Even if set on 'home', the Call Recorder can be programmed to answer the
phone when it rings for a very long time. By doing so the recorder will
automatically switch itself to 'away'. The next time somebody calls, the Call
Recorder will answer immediately.
9.2.8

Changing the System Messages

When the Call Recorder is operated remotely, a number of spoken
statements are used, the so-called system messages. They have a
permanent function, but can be adapted to fit your requirements. A possible
reason could be that you prefer all messages to be spoken by the same
voice. It is not advisable to change the system messages: a lot of work is
involved, and the only person who ever hears them is the owner of the Call
Recorder.
To change the system messages proceed as follows:
•
Press
•
Press the 'WELCOME' softkey
•
Press the 'SYSTEM' softkey
•
Enter the number of the system message
•
Record or play the message with the help of the recorder keys
•
After recording, listen to the message with the recorder keys, confirm
the change with the 'STORE' softkey, or cancel it with the
'CANCEL' softkey.
The following system messages are present at delivery; those printed in bold
are the only ones present in Flash or LS120 recorders:
Date and Time
When the Call Recorder reads out a message remotely, it starts by
mentioning the date and time it came in. The following system messages are
used for this:
68
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV