Installing The Call Recorder; Unpacking; Mounting The Headset Rest - Vidicode 1390 Manual

2 Installing the Call Recorder

2.1

Unpacking

The Call Recorder comes supplied with the following parts:
•
headset
•
mains supply adapter
•
telephone cable with 2 jack plugs having six contacts
•
adapter plug for the local telephone network, when applicable
•
short coiled telephone cable with 2 jack plugs having 4 contacts
•
metal rest for the headset, and a small plastic bag with two screws
and rings for mounting it
•
this manual
•
one LS120 disk (only with model 1370)
2.2

Mounting the Headset Rest

The headset rest has two square corners on one side. These should be
pressed firmly into the L-shaped groove at the bottom of the recorder, and
then tightly screwed in with the two screws and rings supplied.
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
15