Verifying A Disk - Vidicode 1390 Manual

Press 'START' and the recorder will calculate the remaining time available
on the disk. The display might say the following, for example:
Free: 19.243.008 bytes
5,0 hours
7.3.3

Verifying a Disk

Verify Disk
NEXT
Press 'START' and the disk will be checked for errors. This will take quite
some time. The progress of this verification process will be shown on the
display. Verifying is only necessary if an LS120 floppy repeatedly refuses to
work. Verification checks to see if a disk can still be used. If errors are found,
it is advisable not to use the disk for recording anymore, but the fact that an
error has been found does not mean that all information on the disk is lost.
Experience has shown that most of the information on the disk will remain
available.
7.3.4 Erasing Memory
Erase Memory
NEXT START
This function allows you to erase the recordings from the memory in the
recorder. This should only be done after you have copied the memory onto
the disk.
7.3.5 Automatic Copying
Automatic Copy:
NEXT CHANGE
50
BACK
START STOP
STOP
03:00
STOP
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV