Setting The Telephone; Setting The Recorder - Vidicode 1390 Manual

2. Record a minimum of 1 minute of conversation.
3. Replace the handset.
4. Check that recording stops automatically (this should take about 10
seconds).
5. Press the "Call Recorder" key.
6. Press the 'LAST' softkey.
7. Listen to the conversation and check that it is of sufficient quality.
8. Press the 'STOP' softkey.
If this test went well and the conversation has been recorded without
interruptions or other malfunctions, the Call Recorder is ready for use. If the
conversation did not sound good, or the recording did not stop, we advise you
to repeat the procedure described above carefully. Some telephones
connected via the handset cannot easily be adjusted, depending on the type
of handset. An alternative solution would be to start manually or with a start
contact, but this is only necessary on rare occasions.
3.1.5

Setting the Telephone

Telephone Settings
NEXT
The Telephone Settings menu contains data about the working of the
recorder as a telephone and telephone-answering machine. This will be
discussed in more detail in chapter 7.2, but is unimportant when configuring
the recorder for the first time.
3.1.6

Setting the Recorder

Recorder Settings
NEXT
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
MENU STOP
MENU STOP
29