Software Update - Vidicode 1390 Manual

This function allows you to determine the time when the recorder should
automatically copy the recordings from the memory onto the disk. Fill in a
time when the recorder is normally not in use. It is also possible to switch off
automatic copying.
Note: If automatic copying is switched off, the working memory will fill up over
time. The oldest recordings will be overwritten continuously to make place for
new recordings. It will be up to you to ensure that the memory is copied in time
(within four hours of recording time). It is also possible to determine yourself
whether you want to save recordings and to copy them onto the disk
individually. If a partly filled memory is about to run out of space the recorder
will warn you a number of times with a sound signal and a statement on the
display.
7.3.6

Software Update

Software Update
START
This function allows the recorder to load a new software version from the disk.
The recorder recognizes the necessary files; in this way the software could
also be partially updated.
7.4 Copying One Recording
It is possible to copy only one recording from disk to memory and vice versa.
This can be useful if the recording needs to be kept separately. It is done as
follows:
If the Recording is in the Memory:
•
Select the recording
•
Press
•
Confirm the request to copy
Call Recorder Manual ©-2001 Vidicode Datacommunicatie BV
STOP
51