Special Functions - Siemens XC10 Series Installation, Commissioning Maintenance

Special functions

17 Special functions
17.1 Anticipated Silence Sounders
17.2 Anticipated Reset
72
Building Technologies
Fire Safety & Security Products
The functions described in this chapter must be used only during commissioning
and/or maintenance. It is not allowed to use these functions during normal
operation. The following access code shall not be delivered to the customer.
This function makes it possible to stop/start the Sounders during the pre-warning
time.
1. Enable operating access level 2,
2. Press and hold down "Silence buzzer" key (6), then enter the code 2 1 1 2 4 3
on the numeric keypad:
the sounders stop
3. Press the "Silence/Re-sound Sounders" key (5)
the sounders start again
This function makes it possible to reset the system without having to wait the end
of the programmed flooding time.
1. Enable operating access level 2
2. Press and hold down the « Silence buzzer » key (6), then enter
the code 2 4 4 2 1 3 on the numeric keypad:
"Pre-warning" time ends immediately and the reset can be carried out
A6V10257473_b_en_--.doc
01.2010