Siemens XC10 Series Installation, Commissioning Maintenance page 19

Indicators
State
N° Color
14 Yellow Fixed
15 Yellow Fixed
16 Yellow Fixed
17 Red Fixed
Fast
18 Red Fixed
Slow / Fast
19 Yellow Fixed
Slow
Fast
20 Yellow Fixed
Slow
Fast
21 Yellow Fixed
Slow
Fast
22 Yellow Fixed
Slow
23 Yellow Fixed
Slow
Fast
24 Yellow Fixed
Slow
Fast
25 Red Fixed
Slow
26 Yellow Fixed / Slow
Fast
27 Red Fixed
Slow
28 Yellow Fixed / Slow
Fast
29 Red Fixed
Slow
30 Yellow Fixed / Slow
Fast
31 Red Fixed
Slow
32 Yellow Fixed / Slow
Fast
Building Technologies
Fire Safety & Security Products
Description
Manual release is blocked or being tested
–
Standard = not used
–
Alternative = automatic and manual release granted (UK)
–
Automatic release is blocked
–
– At least one detection zone which starts the extinguishing is off or being tested
– All detection zones which start the extinguishing are in alarm condition
One of the electrical manual triggering device (DM1103-L) is actuated
–
One of the detection zones which start the extinguishing is in alarm condition
Extinguishing agent is released
Discharged contact is not activated within 30 seconds after actuators control (*)
Sounders are disabled
Sounders test is in progress (real activation)
At least, an output programmed as Sounders is in fault condition (break or short-circuit)
Actuators are disabled
Actuators test is in progress (simulated activation)
At least, one output programmed as actuators is in fault condition (break or short-circuit)
–
Calibration in progress or error or no calibration data
–
Fire controls are disabled
Warning panels test is in progress (real activation)
At least, one output programmed as fire controls is in fault condition (break or short-circuit)
RT-fault is disabled
RT-fault test is in progress (real activation)
RT-alarm is disabled
RT-alarm test is in progress (real activation)
At least, one output programmed as RT-alarm is in fault condition (break or short-circuit)
Emergency abort is activated
Emergency hold is activated (DM1101-S)
At least, one input programmed as emergency hold/abort is in fault condition (break or short-circuit)
Detection zone 1 is in alarm condition
Detection zone 1 is in alarm condition (first alarm)
Detection zone 1 is disabled (fixed) / being tested (slow)
Detection zone 1 is in fault condition (break or short-circuit)
Detection zone 2 is in alarm condition
Detection zone 2 is in alarm condition (first alarm)
Detection zone 2 is disabled (fixed) / being tested (slow)
Detection zone 2 is in fault condition (break or short-circuit)
Detection zone 3 is in alarm condition
Detection zone 3 is in alarm condition (first alarm)
Detection zone 3 is disabled (fixed) / being tested (slow)
Detection zone 3 is in fault condition (break or short-circuit)
Manual release is activated (DM1103-L line)
Manual release is activated (DM1103-L line) – First alarm
Manual release is disabled (fixed) / being tested (slow)
Manual release is in fault condition (break or short-circuit)
(*) According to programming
Overview
19
A6V10257473_b_en_--.doc
01.2010