Monitored Control Output 1; Monitored Control Output 2; Monitored Control Output 3 - Siemens XC10 Series Installation, Commissioning Maintenance

Extinguishing control unit
Hide thumbs Also See for XC10 Series:
Table of Contents

Advertisement

7.6.1

Monitored control output 1

7.6.2

Monitored control output 2

7.6.3

Monitored control output 3

Building Technologies
Fire Safety & Security Products
This output is exclusively reserved for the connection of the Sounders. Operation is
defined at programming step 05 (see paragraph 12.4).
Fig. 21
XC10xx-A, monitored control output 1 connection
This output can be used for several purposes. Operation is defined at programming
step 11 (see paragraph 12.6).
Fig. 22
XC10xx-A, monitored control output 2 connection
1
RT-alarm
2
Fire control(s): signal triggering to equipment outside the system, according to
EN12094-1 option with requirements 4.26
3
Sounder(s)
4
Warning panel(s) « Mechanical blocked » or « Automatic or manual blocked »
or « Automatic and manual blocked »
This output is exclusively reserved for the connection of the warning panels.
Operation is defined at programming step 12 (see paragraph 12.6).
Fig. 23
XC10xx-A, monitored control output 3 connection
Connections
35
A6V10257473_b_en_--.doc
01.2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc1001-aXc1005-aXc1003-a

Table of Contents