SPX Radiodetection RD8000 User Manual page 7

Locator features
1. Keypad.
2. LCD.
3. Battery compartment.
4. Accessory slot.
5. Headphone jack.
Locator keypad
6. Power key : Switches the unit on
and off. Opens the locator menu.
7. Frequency key
Closes submenu.
8. Up and down arrows
the signal gain. Scrolls through the
menu options.
9. Antenna key : Toggles peak, null,
single antenna and combined peak/null
modes. Opens a submenu. Prolonged
key press toggles between depth or
current display on the LCD.
10. Graph key : Saves SurveyCERT
measurements.
11. Transmitter key
commands on iLOC
to iLOC enabled transmitters.
™
Locator screen icons
12. Indicates the signal strength and peak
marker.
13. Signal strength: Numerical indication of
signal strength.
14. Left / Right Proportional arrows:
Indicates the location of the line relative
to the locator.
15. Battery icon: Indicates the battery level.
16. Sensitivity and Log number: Displays
signal gain / sensitivity, or the log
number momentarily after a survey
log is saved to memory.
: Selects frequency.
: Adjusts
™
: Sends iLOC
™
enabled locators
™
17. Volume icon: Displays the volume level.
18. Current Direction arrows: Used
for CD and Fault Find features.
19. Radio Mode: Indicates when Radio
Mode is active.
20. Power Mode: Indicates when Power
Mode is active.
21. Accessory indicator: Indicates when
an accessory is connected.
22. CD Mode icon: Indicates when Current
Direction Mode is active.
23. A-Frame icon: Indicates when the
A-Frame is connected.
24. Operating mode indicator / menu
display.
25. Bluetooth icon: Indicates status of
®
Bluetooth connection. Flashing icon
®
means pairing is in progress. Solid icon
indicates an established connection
is active.
26. Antenna mode icon: Indicates antenna
selection: Peak, Null, Single and
combined Peak/Null.
27. Sonde icon: Indicates that the signal
source is from a sonde.
28. Line icon: Indicates that the signal
source is from a line.
29. Compass: Shows the direction of the
located cable relative to the locator.
30. Tx status: Displays transmitter
connection status (on iLOC enabled
models).
31. Tx standby: Indicates that the
transmitter is in Standby Mode
(on iLOC enabled models).
32. Current / depth indicator.
7