SPX Radiodetection RD8000 User Manual page 13

Batteries
The RD8000 locator and transmitters can be powered using NiMH or alkaline D-Cell
(LR-20) batteries. Alternatively, Radiodetection supplies rechargeable battery packs for
both the locator and transmitter. It is important that you set the system to match the
currently installed battery type to ensure optimal performance and correct battery level
indication. To set your battery type:
1. Press the
key momentarily to enter the menu.
2. Scroll to the BATT option using the
3. Press the key (
4. Scroll up or down to select the correct battery type.
5. Press the key to accept your selection and return to the main menu.
6. Press the key to return to the main operation screen.
iLOC
™
iLOC lets you control the transmitter remotely using your RD8000 locator. With iLOC you
can adjust the output frequency, power settings and use SideStep. iLOC commands are
sent via a Bluetooth
®
line of sight.
Pairing
Pairing the locator to the transmitter is straight-forward. Before you begin, you may
choose to switch off all nearby Bluetooth
and transmitter's pairing process.
Preparing the locator for pairing
1. Power up the locator by pressing the
2. Once the locator is switched on, press the
3. Bluetooth options are located in the BT menu, you can find it by using the
keys to scroll through the options.
4. Press the key to enter the BT menu.
5. Scroll to the PAIR menu using the
PAIR menu.
6. Scroll to the BT-TX option using the
7. The locator is now ready to pair, follow the instructions for the transmitter to
continue.
on the transmitter) to enter the BATT submenu.
module that can operate at distances of up to 300 meters in direct
®
or arrows.
equipment as it may interfere with the locator
key.
key again to enter the menu.
or arrows and press
or keys.
13
or
key to enter the