SPX Radiodetection RD8000 User Manual page 14

Preparing the transmitter for pairing
1. Power up the transmitter by pressing the
2. Once the transmitter is switched on, press the
3. Scroll to the BT menu using the
the BT menu.
4. Scroll to the PAIR option using the
5. The transmitter is now ready to pair.
Finalizing the pairing process
1. Once both devices are ready to pair press the
on the locator. You must press these keys within a 30 second window, otherwise
the connection may time out.
2. The transmitter and the locator will now attempt to pair.
When pairing is in progress, the transmitter and locator will display a flashing Bluetooth
icon. Pairing can take up to a minute. If the pairing process is successful, the transmitter
will display the icon and the locator will display a persistent Bluetooth
duration of the connection.
If pairing fails, ensure that any nearby Bluetooth
then repeat the process.
Once the locator and transmitter have successfully paired you can use iLOC
the transmitter's output frequency and power levels remotely with the locator.
Using iLOC
Changing transmitter frequency
1. Switch on the locator and transmitter by pressing the
keypads.
2. Pair the locator and the transmitter if you have not already done so.
3. On the locator, select the frequency you want by pressing the
frequency is displayed on screen.
4. iLOC commands are sent using the
the transmitter.
5. The locator's LCD will display OK on success or FAIL if the iLOC command was
unsuccessful.
or
or
™
key, press it to send the new frequency to
14
key.
key to enter the menu.
keys and press the
keys.
key on the transmitter and
devices are switched off or invisible
®
key on their respective
key to enter
key
®
icon for the
®
to change
™
key until the