Fcc And Industry Canada Statements; Service And Maintenance - SPX Radiodetection RD8000 User Manual

Wireless technology compliance
Use of iLOC™ wireless technology may be subject to national telecommunication
regulations. Check with your local government authorities for further information.

FCC and Industry Canada statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. To comply with the
FCC requirements, this device and its antenna must not be co-located or operated in
conjunction with any other antenna or transmitter.
Training
Radiodetection provides training services for most Radiodetection products.
Our qualified instructors will train equipment operators or other personnel at your
preferred location or at Radiodetection headquarters. For more information go to
www.radiodetection.com or contact your local Radiodetection representative.

Service and Maintenance

The locator and transmitter are designed so that they do not require regular calibration.
However, as with all safety equipment, it is recommended that they are serviced at least
once a year either at Radiodetection or an approved repair center.
Radiodetection products, including this user guide, are under continuous development
and are subject to change without notice. Go to www.radiodetection.com or contact
your local Radiodetection representative for the latest information regarding the RD8000
or any Radiodetection product.
24