SPX Radiodetection RD8000 User Manual page 17

persistent Bluetooth
®
If pairing fails, ensure that any nearby Bluetooth devices are switched off or invisible then
repeat the process.
Pairing with your PC
On the locator
The instructions are the same as for pairing to a PDA as described above.
On your PC
1. Connect a USB Bluetooth
2. Alternatively if your PC features an integrated Bluetooth
following the documentation that came with your computer.
3. Open the Control Panel and double click on 'Bluetooth Devices'.
4. Click on Add, Windows will start the 'Add Bluetooth Device Wizard' to guide
you through the process.
5. Check the 'My device is set up and ready to be found' box and click Next to
search for Bluetooth
6. You should see a device called RD8K; this is the RD8000 locator.
7. Select the RD8K device and click Next.
8. Tick the 'Use the passkey found in the documentation' box and enter 1234 as
the passkey.
9. Now click Next to begin pairing with the RD8000 locator.
10. Completing the Add Bluetooth Device Wizard will be displayed for a successful
pairing.
11. Click Finish to close the Wizard.
Refer to the SurveyCERT manual
SurveyCERT is an advanced application and as such, it is strongly recommended
that you refer to the SurveyCERT Operation Manual before you conduct your first
SurveyCERT assisted survey. The manual provides more detailed instruction on pairing,
GPS synchronization and using the analysis tools on your PDA or PC. The SurveyCERT
Operation Manual is available from www.radiodetection.com.
icon for the duration of the connection.
adapter to your computer.
®
devices.
®
module, switch it on
®
17