GTP Placement and Clocking
The GTP Placement and Clocking screen (page 1) of the Wizard
select the component name and determine the placement of the GTP transceivers and the
reference clock source.
1.
The number of GTPA1_DUAL transceiver primitives appearing on this page depends on
the selected target device and package. The PCI EXPRESS example design uses four GTP
transceivers (two GTPA1_DUAL primitives).
selection and Reference Clock options.
X-Ref Target - Figure 3-5
Spartan-6 FPGA GTP Transceiver Wizard v1.8
UG546 (v1.8) December 14, 2010
In the Component Name field, enter a name for the core instance. This example uses
the name pcie_wrapper.
Figure 3-5: GTP Placement and Clocking - Page 1
www.xilinx.com
Generating the Core
(Figure
Table 3-1
describes the GTP transceiver
3-5) allows you to
19