Sewing With The Sailrite Fabricator; Starting To Sew - Sailrite Fabricator Manual

SEWING WITH THE SAILRITE FABRICATOR

Starting to Sew

1. Use the hand lever (C) or knee lift (page
66
17) to raise the presser feet. Then place the
material to be sewn under the feet and use the
hand lever/knee lift to lower it onto the material.
2. The threads from the needle and bobbin
should be behind the feet as you start to sew.
C
Hold them down with your finger.
3. Press the motor pedal to begin sewing. After
the first couple stitches are made, you may let
go of the thread ends. (If the thread ends are
not held down for the first few stitches, they may
get tangled.)
Always turn the balance wheel of the machine
toward you to reduce the possibility of a thread
jam in the lower mechanism.
Never operate the machine (when threaded)
without material under the presser foot.
Sailrite Fabricator Guidebook | 36