How To Wind A Bobbin - Sailrite Fabricator Manual

How to Wind a Bobbin

1. Push the bobbin on the bobbin winder spindle
as far as it will go (Figure
2. Pass the thread from the thread stand to the
back end of the bobbin winder. Pull the thread
through the hole near the thread tensioner (A)
and then behind and under pulling the thread
between the discs of the tensioner
3. Bring the thread forward to the bobbin and
push the thread tail through one of the holes in
the bobbin from the inside. Pull the tail out about
51).
two inches (Figure
Sailrite Fabricator Guidebook
49).
(Figure 50).
49
50
A
51
| 28