Pulling Up The Bobbin Thread - Sailrite Fabricator Manual

Pulling Up the Bobbin Thread

To pull up the bobbin thread, make sure the
presser feet are up, grasp the end of the needle
thread (A) then rotate the top of the balance
wheel toward you to lower the needle. Continue
to rotate the wheel until the needle is once again
in its highest position. Pull on the needle thread
(A) and the bobbin thread (B) will be drawn up
through the needle plate
Use a small instrument (seam ripper,
screwdriver, pencil etc.) to slide under the feet
and pull both threads outward
needle thread (A) should be through the inner
presser foot when completed.
35 |
(Figure 64).
(Figure 65). The
A
B
Sailrite.com
64
65