Temperature Compensation Factor; Length Of Sensor Cables; Path Settings; Installed Paths - Siemens SITRANS F Function Manual

Related
Path
3.1.5.11

Temperature compensation factor

Description
Temperature compensation factors for the sensors.
Setting
Default
Related
Path
3.1.5.12

Length of sensor cables

Description
Length of sensor cable between transmitter/DSL and any sensors. All cables must have the
same length.
Setting
Default
Related
Path
3.1.6

Path settings

3.1.6.1

Installed paths

Description
Bit encoded value containing installed paths for clamp-on systems.
Bit 0: Path 1 installed
Bit 1: Path 2 installed
Bit 2: Path 3 installed
Bit 3: Path 4 installed
Bit 4: Path 5 installed
FST030
Function Manual, 04/2017, A5E35693328-AA
Setup → Sensor settings → Sensor selection → Temperature code of the sensor
0.0001 to 0.0009
0.000638
Setup → Sensor settings → Sensor selection → Temperature compensation factor
0.0 m to 20.0 m
0.0 m
Setup → Sensor settings → Sensor selection → Length of sensor cables
Setup
3.1 Sensor settings
33