Check And Replacement Of Oil In Gearbox, Axle Drive And Rear Axle Portals; Drainage And Inspection Holes - Zetor Proxima Series Operator's Manual

CHECK AND REPLACEMENT OF OIL IN
GEARBOX, AXLE DRIVE AND REAR
AXLE PORTALS
Oil level in the gear mechanisms is
checked oil gauges, whitch is located in
left rear part of the gearbox case.
A - Standard oil filling
Carry out checks
engine is stopped.
MAINTENANCE INSTRUCTIONS
E723a

DRAINAGE AND INSPECTION HOLES

1. Drain plug of the gear mechanism.
2. Oil drain plug from the outlet for the
front driving axle.
3. * Brake chamber inspection screw.
4. Plug for drainage of oil from the axle
drive case.
when the
5. Drain plugs of the left and right brake
chambers.
E729
1. * Inspection and oil filling screw of the
2. Plug for draining of oil from the axle
3. *Inspection screw of the brake cham-
166
axle shaft case (applicable for stan-
dard adjustment of the portal).
shaft case.
ber.
* After screwing out the inspec-
tion screw the level of oil shall
reach lower edge of the inspec-
tion hole.
E730