Tractor Greasing Plan - Zetor MAJOR CL Operator's Manual

Tractor greasing plan

Safety instructions for lubrication of the tractor
The tractor maintenance may be performed only by the trained personnel thoroughly familiarized with
operational and safety principles.
During maintenance of the tractor wear appropriate (specified) personal protective equipment
(occupational footwear, protective gloves, safety goggles, etc.).
Prior to starting the work, secure the tractor against movement using manual brake.
Lubrication must be performed only when the engine is at standstill!
Front drive axle
Position Name
number
1 Pivot pins
2 Spigot shaft
3 Cardan shaft joint
Three-point linkage and rear semi-axes bearings
Number Name
of
position
1 Rear semi-axes bearings
2 Lifting rod
3 Upper draw bar bracket
Front three-point hitch
Pos. Identification
no.
1 Pins of cylinders of the front
three-point hitch
TRACTOR MAINTENANCE
Number of
greasing
points
4
2
2
Number of
greasing
points
2
2
3
No. of
lubrication
points
4
102
8P
NM13N073
02F