Emerson Machinery Health Expert CSI 2600 User Manual page 72

Data collection and analysis
Table 6-1: Transient Status tab fields
Field Message
Status Node(Unit)Up
Acknowledged
Current Transient Acquisition has
Acquisition started
State
Transient Acquisition has
stopped
Unknown
Active Primary
Streaming
(1)
Location
Failover
Transient Oldest Data
Drive Details
Newest Data
Storage Primary
Location
Configuration
Failover
Auto-Archive Tach #
Status
Speed
Predicate
Last Report
State
(1) The Active Streaming Location is where transient data is recorded during normal/constant CSI 2600 operation. Measurements from
this drive are extracted when an archive is created, and sent as a folder (archive to the online server).
6.4.2 Online Watch—Transient Archive Status tab
The Transient Archive Status tab shows archives that are currently being created.
68
Description
Unit is ready to monitor using the database definition.
Unit is reorganizing internal software and schedules to conform to the
database definition.
Transient measurement is proceeding normally.
Transient measurement was manually stopped.
Temporary message after a database is downloaded.
Transient system is recording to the primary drive, as specified in Online
Configuration > Unit Properties.
Transient system has detected a problem with the primary drive and is
recording to a Failover drive, as specified in Online Configuration > Unit
Properties.
Date and time of the oldest measurements currently stored in the unit.
Update this field by clicking Refresh.
Date and time of the newest measurements currently stored in the unit.
Update this field by clicking Refresh.
Path displays which drive—Internal, External, No Path—has been specified
as the primary streaming location. Size displays how much memory is
available.
Path displays which drive—Internal, External, No Path—has been specified
as the secondary streaming location. Size displays how much memory is
available.
Tachometer input associated with a group of transient vibration
channels.
Current speed measured by the Tach input.
Name of the predicate used for triggering the auto-archive .
Date and time of the most recent archive.
True means the parameters of the auto-archive predicate are being met
and data is being recorded to the drive. An analyst can select the
Transient Archive Status tab to monitor the progress of archive creation.
False means the parameters of the auto-archive predicate are not being
met and data is not being recorded.
Disabled means the automatic archive predicate has been disabled.
MHM-97453, Rev 1