Emerson Machinery Health Expert CSI 2600 User Manual page 2

Copyright
©
2014 by Emerson Process Management. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without the written permission of Emerson.
Disclaimer
This manual is provided for informational purposes. EMERSON PROCESS MANAGEMENT MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Emerson Process Management shall not be liable for errors, omissions, or inconsistencies that may be
contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Information in this document is subject to change without notice and does not represent a commitment on the part of Emerson
Process Management. The information in this manual is not all-inclusive and cannot cover all unique situations.
Trademarks and Servicemarks
See http://www2.emersonprocess.com/siteadmincenter/PM%20Central%20Web%20Documents/marks.pdf
All other marks are property of their respective owners.
Patents
The product(s) described in this manual are covered under existing and pending patents.
CE Notice
Emerson Process Management products bearing the symbol on the product or in the user's manual are in compliance with
applicable EMC and Safety Directives of the European Union. In accordance with CENELEC standard EN 50082-2, normal intended
operation is specified as follows: 1. The product must not pose a safety hazard. 2. The product must not sustain damage as a result
of use under environmental conditions specified in the user documentation. 3. The product must stay in or default to an operating
mode that is restorable by the user. 4. The product must not lose program memory, user-configured memory (e.g., routes), or
previously stored data memory. When apparent, the user may need to initiate a reset and/or restart of a data acquisition in
progress. A Declaration of Conformity certificate for the product is on file at the appropriate Emerson Process Management office
within the European Community.