Installation; Installation Safety - Toshiba 5000 Series Installation And Operation Manual

8

Installation

8.1

Installation Safety

5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
Keep the SPECIFIED CLEARANCE around the UPS.
Inadequate space around the UPS makes it difficult to perform maintenance/
inspections, lead to insufficient ventilation, and/or will cause malfunctions.
See
DO NOT tilt the UPS more than 10° from upright position.
Tilting the UPS more than 10° may cause crushing, trapping or other personal injuries
and cause physical damage to internal components.
Install anchor bolts to secure the UPS to the installation floor.
The UPS may fall during an earthquake if the anchor bolts are not installed and secured.
DO NOT transport, move, store, or place the UPS on its side.
Forces due to heavy components inside may damage the UPS.
DO NOT allow the UPS to suffer shock or impact when unpacking.
Tools used to remove packaging materials may cause damage to the UPS.
DO NOT push or pull on the sides of the packaging, or the UPS to move it.
Always use a crane, forklift, or pallet jack for transporting and positioning the
UPS.
Pushing/pulling on the sides of the unit to move it may result in damage to the UPS.
Install the UPS in an appropriate environment.
Improper storage and installation environment may deteriorate insulation, shorten
component life and cause malfunctions.
See Table 6.1: UPS Storage/Operating Environment Standards
WARNING
CAUTION
23