12.4
Header Bar
The Header Bar on the graphic display panel displays three system parameters: the System Load, Current Status, and
System Time.
No.
1
System Load – Load as percent of full load. Low – Less than 15% Load.
2
Current Status – UPS status at the moment. (Status is delayed by a few seconds)
System Time – Current time in AM-PM format
3
12.5
Footer Bar
The Footer Bar on the graphic display panel displays three system parameters:
No.
1
Fault – Displays last fault sensed by UPS. A Fault causes the UPS to switch to bypass
2
Warning – Displays last warning sensed by UPS. Multiple frequent warnings of the same
3
UPS Mode – Current state of UPS.
5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
1
Header Bar Components
FIGURE 12.3: HEADER BAR DISPLAY COMPONENTS
1
Footer Bar Components
and it will not automatically reset.
type may induce a fault condition.
FIGURE 12.4: FOOTER BAR DISPLAY COMPONENTS
3
2
Function
3
2
Function
47