Ups Status Indicators - Toshiba 5000 Series Installation And Operation Manual

7.2

UPS Status Indicators

The following table identifies the different UPS Status Indicators on the Power Electronics Bay.
No. Name
1 Rectifier AC Input Lit if input power is supplied to the UPS.
2 On Line
3 On Bypass
4 On Battery
5 Battery Warning
6 UPS Overheat
7 UPS Warning
8 UPS Fault
9 Push to Test
5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
TABLE 7.2: UPS STATUS INDICATORS LOCATION AND IDENTIFICATION
Description
Lit if UPS is in Inverter Operation mode. Power is
supplied to the load via the inverter.
Lit if UPS is in Static Bypass Operation mode. Power
is supplied to the load via the static bypass.
Lit if UPS is in Battery Operation mode. Power is sup-
plied to the load via the inverter and the UPS batter-
ies are discharging.
Battery Warning or Fault has occurred.
UPS temperature has reached an unsafe level.
UPS currently has triggered a warning state.
UPS currenlty has triggered a fault.
Tests the Status Indicator LEDs. Press and hold to
verify LEDs illuminate. Release to end test.
5000 SERIES 3P1 UPS
Function
Solid
Solid
Blink
Blink
Blink
Solid
Blink
Solid
N/A
1
2
3
4
5
6
7
8
9
LED STATUS INDICATORS
21