Toolbar: Quick View On/Off - Toshiba 5000 Series Installation And Operation Manual

12.11

Toolbar: QUICK VIEW ON/OFF

At anytime while using the tabs to view system details, the summary of the UPS Input, Output, and DC Bus can be viewed
by pressing the Q. VIEW button (Button will display Q. VIEW ON). The illustration below highlights the critical features of
the Quick View display.
Exit Quick View by pressing the Q. VIEW button again. (Button will display Q. VIEW OFF)
No. Description
1 Displays Vin, Vout, and Vbyp
2 Displays output current for all three phases.
Changes current display mode: Press repeatedly to display alternately the current in
3 Amps (A), or as a % of rated current (%).
The highlighted icon indicates the current display mode.
4 Displays DC Bus voltage, Battery voltage, and Battery Charge/Discharge current.
3
5000 Series 3P1 Industrial UPS Installation and Operation Manual – 92973-001
TABLE 12.3 – QUICK VIEW DISPLAY
FIGURE 12.6: QUICK VIEW DISPLAY
1
4
2
51